2. EQUIPMENT REQUIRED (NOT SUPPLIED)
The tools and screws required for the installation must be in good condition and compliant with applicable safety standards.
ciment
sable
ø6mm
clé plate de 17
Photocells
10m cable
4 x 6/10
Thank you for purchasing an AVIDSEN automatic gate opener.
This document is a quick start guide detailing the main installation steps as well as the equipment required. To perform the installation, please
download the installation manual at the following address: www.avidsen.com
Warning: The safety instructions and installation instructions can be found in the installation manual. Follow all these instructions, as an
incorrect installation can cause serious injuries.
1. DESCRIPTION
V1
Ref. 114459
EN
ZÉNIA250
MOTOR DRIVE
FOR SLIDING GATES
1
x 1
3
x 1
3
x 2
3
x 2
4
x 2
6
x 4
12
x 1
7
x 8
13
x 2
8
x 8
9
x 4
5
x 1
11
x 1
2
x 8
10
x 1
10
x 6
10
x 6
10
x 4
1
24 V geared motor
2
50 cm rack
3
Flashing light and screws
4
Remote control
5
Override key
6
Floor fastening pin
7
M10 nut
8
Ø10 washer
9
Ø10 spring washer
10
Photocells and their screws
11
Disengagement label
12
Installation template
13
Backup fuses