11
In
CREW
mode, only the pilot and copilot are connected to the
telephone. Passengers will not hear the telephone. The pilot and
copilot will also have transmit capability on the selected com
transceiver.
In Pilot
Isolate
intercom mode, when the AMX240 is in the
TEL
mode, the pilot position is in the "Phone Booth." Only the pilot will
hear the telephone, and only he will be heard. He will also have
access to Com 1 or 2, and will transmit on that radio using the
PTT. All selected audio is provided to the pilot.
REPLAY BUTTON
,
This is the “say again” function that repeats previous ATC
communications.
The AMX240 stores the last 8 incoming audio messages (up to a
total maximum of 45 seconds of audio) from the radio you have
selected for transmit. The pilot and copilot hear the playback.
To play back the last recorded message, press the REPLAY
pushbutton. You can either wait for the message to finish playing
before accessing the prior message, or cancel the current
playback and step backward. To cancel the playback, press and
hold the playback button for two seconds. The next time the
button is pressed the next earlier message will be heard.
The playback will stop whenever there is more incoming selected
com audio, and the message can be replayed from the beginning
by pressing the REPLAY button. Playback can also be stopped
by pressing the MUTE button or holding the REPLAY button for
for more than 2 seconds again.
The Replay button color does not change from WHITE.
