System Overview
1-13
To disable Full-time Envelope Alerting (EA
™), pull the autopilot
circuit breaker.
(
*
In cases of pre-Rel 8.0.4 Avidyne PFD code combined with post-Rel 2 DFC90
code, the active (green) autopilot mode annunciators will flash during Underspeed
conditions. This is a normal consequence of maintaining backward compatibility.)
BARO ADJUST
Upon input of a new barometric altimeter setting, the autopilot
automatically re-captures the previously set target altitude,
without further action required from the pilot. In other words, if
the autopilot was in Altitude Hold for example, changing the
barometric pressure setting will result in the autopilot
automatically correcting the appropriate amount to re-capture the
previous MSL altitude hold target.
Change 3