Flying with the EXP5000
600-00157-000 Rev. 06
-43-
Entegra EXP5000 PFD
Dual-PFD Synchronization
See Section 5.2, "Synchronized and Non-synchronized Controls" on
page 69, to learn which PFD settings and Bugs are synchronized
between PFDs and which can have different values on the pilot and
copilot PFDs.
IntelliFlight 2100 Horizontal Modes
The Envision PFD supports the following Intelliflight 2100 horizontal
modes:
●
Heading Capture/Hold Mode
—Press the
Hdg Bug
button on the
PFD and rotate the right knob to set a desired heading. Press the
HDG
button on the autopilot control head to engage heading
mode. The autopilot will track the input heading. The autopilot
control head will annunciate HDG. Select a new heading at any
time while the autopilot is in heading mode and the autopilot will
track the new heading bug value.
Table 3.8
IntelliFlight 2100 Annunciations
AP
Status
Active
Lateral
Mode
Armed
Lateral
Mode
Control
Wheel
Steering
Active
Vertical
Mode
Armed
Vertical
Mode
Trim
Status
AP INIT
ROLL
NAV
CWS
PITCH
ALT
TRIM UP
AP FAIL HDG
APR
IAS
GS
TRIM DN
AP
NAV
REV
VS
FAIL
FD
NAV GPSS NAV GPSS
GS
AP RDY APR
APR GPSS
ALT HOLD
APR GPSS FAIL
FAIL
REV
FAIL
Note:
The autopilot can be coupled only to a GPS or NAV selected as the
PFD
Nav
source. The autopilot can
not
be coupled to a
Bearing
source.
Summary of Contents for Envision EXP5000
