Setting Up Datalink for Iridium
600-00078-001 Rev 05
-103-
Avidyne EX500/EX600 MFD
10.5 Setting Up Datalink for Iridium
The Datalink
Setup
page enables you to change datalink settings,
including enabling Iridium 2-Way Datalink.
To access the Datalink Setup page, Rotate the left knob to select the
DL
tab. On the DL tab, press
Next DL Page
until the
Datalink
Setup
page opens.
Figure 10.7 Datalink Setup Page
Use the
Select
key (2-knob EX500) or
Select
knob (4-knob EX500/
EX600) to move from field to field and rotate the
Change
knob to
select choices for an option. Press
Save
to save changes.
The Datalink Setup page contains the following keys:
●
Datalink Defaults
- Changes all fields to their default value. To
undo, press
Cancel
. The default values are:
■
Coverage Area
- Flight Plan
■
Coverage Radius
- 400 NM
Summary of Contents for FlightMax EX500
