Data Blocks in the upper left and right corners of the Map page can be configured to
show engine instrument information.
The “Lean” data block shows the status of the Lean function. After leaning to Best
Economy or Best Power on the Engine Page, press the “Absolute” or “Normalize”
button to exit the Lean Assist mode.
On the Map Page, the Lean data block will show “Economy” or “Power” when the Lean
Assist procedure is completed and exited.
Other Lean data block states are:
Leaning... - Displayed when you switch back to the map page before the Lean Assist
mode was exited.
Incomplete - When the Lean Assist mode is exited prior to achieving Best Power or
Best Economy.
FF Change - When the lean state is changed by a fuel flow adjustment.
Pwr Change - When the lean state is changed by a power adjustment.
Sensor Status Box and Engine Instrument Data Blocks on Map Page
The Engine Sensor Status Box provides textual and
graphical representation of the Fuel Quantity,
Percent Power, EGT or TIT, and CHT. The numeric
readouts for EGT and CHT show the current hottest
cylinder
temperature. The default datablock display is Fuel
Quantity EGT or TIT, and CHT, but other
combinations are available.
See the Data Block Setup section on Page 36 for
additional information.
FlightMax EX5000
-22-
600-00105-000 Rev 01
Engine Instruments - Data Blocks on Map Page