600-00105-000 Rev 01
-23-
FlightMax EX5000
The FlightMax EX5000 Engine Monitor provides full-time recording of time, position,
pressure, altitude, and critical engine performance parameters. The MFD will log up to
30 hours of recorded data, which can be downloaded via the MFD's bezel-accessible
data port.
In order to download the stored engine data log files:
1) Turn power OFF to the MFD.
2) Install compatible blank USB disk into the Data Loader drive.
3) Connect one end of the interconnect cable to the Data Loader and the other end to
the MFD data port on the front panel.
4) Apply power to the MFD by turning ON the master switch.
5) The Data Log Transfer screen is displayed.
6) Press the “Proceed” button. Do not turn off the MFD or disconnect the interconnect
cable during a data transfer.
7) The data transfer is complete when disk is automatically ejected from the Data
Loader drive and the “Press Any Bezel Key” message is displayed.
8) Remove the Data Loader and interconnect cable and store in a safe place.
The disk will contain up to 30 hours of engine data in two file formats; an ASCII text file
which can be opened in most spreadsheet programs (.log), and a Jeppesen Track file
(.txt) which is compatible with Jeppesen FliteStar.
Engine Instruments - Data Log