4
EnglishEnglish
Mounting the Lens
Important:
Avigilon cameras require high-quality lenses to take full
advantage of their advanced imaging capabilities. To avoid poor image
quality caused by incorrect lens selection, only use lenses that are
recommended by Avigilon for use with this camera model. For a list of
lenses recommended for use with this camera model, contact your
Avigilon dealer or representative.
Canon
®
EF or EF-S lenses can be mounted to the camera.
To mount a lens to the camera, complete the following steps:
1.
Remove the dust cap from the lens mount.
2.
Locate the mount index on the lens. The mount index is a
red or white dot or square on the circumference of the
camera-end of the lens.
3.
Align the mount index on the lens with the camera’s mount
index of the same color.
4.
Turn the lens clockwise until it locks into place.
To detach a lens, complete the following steps:
1.
While pressing the lens release button, turn the lens
counterclockwise until it stops.
2.
Remove the lens from the camera.
3.
Immediately mount another lens or a dust cap on the lens
mount to prevent contamination.
Caution —
•
Never touch the image sensor or any glass
elements inside the lens mount except with the
recommended cleaning tools.
•
Do not allow dust, moisture or any other foreign
debris to enter the lens mount.
•
Avoid leaving the image sensor exposed for
extended periods of time.
•
Always cover the image sensor with either a lens
or a dust cap.
Summary of Contents for 11MP-HD-PRO-C
Page 2: ......
Page 23: ... 9 27 11 Avigilon Corporation ...
