Avigilon Control Center System Integration Guide with DSX Access Systems
4
8. In the following
Assign Cameras
field, enter the logical ID that was assigned to the
camera in the Avigilon Control Center Client software. See
Assigning Logical IDs to
Cameras
on page 3.
You can assign more than one camera to a camera profile, and a camera can be
added to more than one profile.
•
To add multiple cameras to a profile, enter the camera’s logical ID followed by a
common then the next logical ID etc.
9. If the camera you are adding to this profile is a PTZ camera, select the
PTZ Camera
check box.
10.Enter the username and password created in
Adding an Integration User in Avigilon
on
page 3.
11.Click
OK
to save the camera profile.
12.Repeat this procedure until all cameras from the Avigilon Control Center have been
added to the WinDSX software.
Once all the camera profiles have been created, you can assign the camera profiles to Inputs and
Outputs in the WinDSX software. See
DSX DVR/NVR Configuration
for more information.
