30
Method of OHP Operation
Attaching the Document Cover
The document cover can be removed to suit the
circumstances.
NOTE:
When removing the document cover, lift the cover by
both hands and remove it.
The maximum reading size of documents and printed material is 216 mm high
by 288 mm wide.
Consequently, when A4 paper (210 mm high and 297.5 mm wide) is placed on
the projector, reading will be as illustrated in the diagram below (which depicts
the area that can be projected as the portion with diagonal lines).
Preparation of the Projection Document
The document (printed material) that is to be projected is placed on the projector as illustrated in the diagram below
and the document cover is closed.
NOTE:
• The document can be projected even when the document cover has not been closed; however, in this instance, unnec-
essary items may be projected which will make the image difficult to view.
• When paper having luster such as magazine covers are placed on the projector, the internal fluorescent lamp light will be
picked up and the edges of the projected document may be messy.
Reading Size of Projection Documents
The portion that falls outside of the reading range will not be projected;
therefore, shift the paper as required.
Other functions that are used in the OHP operation can be seen on the following pages:
●
Switching the input to OHP
→
See Page E-23
●
Changing the projection image to a still image display
→
See Page E-26
●
Capturing a projection image
→
See Page E-26
●
Viewing captured images
→
See Page E-27
Vertical document Top side
A4 Paper
297 mm (Paper size)
288 mm (Reading size)
216 mm (Reading siz
e)
210 mm (P
aper siz
e)
Horizontal document
Top side
