Aviom A-16 Personal Monitor Mixing System
50
51
Signal flows from the console into the effect device and back into the
console
To use the A-16T Transmitter with this insert layout, both the In and Thru jacks on
the Transmitter are used. The main console’s Insert Send should be plugged into the
In jack on the Transmitter. The Thru jack on the Transmitter is used to return the
signal to the console, completing the audio loop. In this case the A-16T acts like an
effects device, but it has no audible effect and does not change the audio signal in any
way.
Signal flows from the console into the A-16T and back into the console
Note
: There is some variation in the send/return insert wiring on
consoles. Some manufacturers use the TRS
tip
connection for the
Send function, while others use the
ring
connection. Consult your
console’s documentation.
Discreet Insert Send and Return Jacks
If a console uses separate jacks for Send and Return functions, the cable connections
are much more obvious. The Send from the Insert point on the console is connected
to the A-16T Transmitter In jack. The Thru on the A-16T is connected to the Return
jack on the console to complete the loop.
A-16T In
Separate cables connect signals into the A-16T and back into the console
Insert Send
Insert Return
Console TRS
Channel Insert
Console TRS
Channel Insert
