1
Warning
Failure to observe the following warnings may
lead to risk of serious injury from fire or electric
shock.
Before installing the card, you must refer to the owner’s manual of the
host device or to the Yamaha web site to verify that your host device
supports this card, and to verify the number of cards that can be
installed in combination with other Yamaha or third-party cards.
• Do not attempt to disassemble or modify the card. Do
not apply excessive force to board connectors or other
board components. (Mishandling the board may lead to
shock, fire hazard, or equipment failure.)
• You must turn off the power of your device before you
begin installing the AVIOM16/o-Y1 card.
• Be sure to disconnect the power cable from the main
unit before installing this card (to eliminate shock
hazard).
Caution
Failure to observe the following precautions may
lead to personal injury, or may result in damage to
equipment or other property.
• Do not touch the board’s metallic leads (pins) when
handling the card. (Pins are sharp and may cause hand
cuts.)
• The card is electrostatic-sensitive. Before handling the
card, you should briefly touch the main unit’s metal
casing with your bare hand so as to drain off any static
charge from your body.
!
!
Information in this document is subject to change. All rights reserved.
Copyright ©2004 Aviom, Inc.
Printed in USA
Document Rev. 1.00
