6
Base charging
Avion Power base chargers accept input voltages of 110V or 220V. Operators must confirm that their charger is
compatible with the voltage in geographies in which Voyager will be used. If the base charger has a voltage input
selector, please select the appropriate input voltage based on your geographic location.
The Voyager and the base charger must be “on” during charging. Voyager’s LCD will display the increasing state
of charge, but operators should rely on the base charger
’s LED to determine when charging is complete.
The base charger will recharge an empty Voyager in 60 to 90 minutes.
NATO charging
Voyager will charge through the NATO plug when the aircraft’s generator is “on” if the aircraft’s circuitry powers the
NATO plug. This charging option usually offers higher current, allowing operators to charge Voyager very quickly.
Operators who wish to charge Voyager using the NATO plug need to determine whether the generator powers the
NATO plug. After conducting a Voyager start, switch to generator power and observe Voyager’s state of charge and
the aircraft’s amp meter. If the state of charge is increasing and the amp meter is above normal levels, Voyager is
charging. NATO plugs are often powered on Bell Helicopters and MD Helicopters, but not on Airbus Helicopters.
The Voyager must be “on” during charging. Voyager’s LCD will display the increasing state of charge.
Charging Voyager through the NATO plug is not a primary charging method, but it can be useful in remote areas or
during circumstances that force the operator to wait on the ground.
Maintenance
Voyager does not require maintenance, other than charging.
Troubleshooting
Contact Avion Power if Voyager’s LCD displays “SERVICE.”
Storage
Voyager Power Sources are durable tools designed to withstand daily use as a ground power unit or start battery. In
order to maximize Voyager’s performance and service life, operators should follow these storage guidelines.
▪
Store Voyager within its storage temperature range of -40° C to 60° C. The optimal storage temperature range
is 10° C to 20° C.
