- 13 -
2.)
Open IPEdit and any device in the same network should automatically be detected and
listed in the
local devices sections
.
3.)
Setup the Device:
Note: (If the device is not on the same network as the computer being used it cannot be
accessed)
a.
Quick Easy Setup (Recommended)
1.) Click on the REF button in IPEdit,
and wait a few seconds. This will
detect the network settings and setup the device automatically.
2.) Once settings have been detected hit the apply button to apply the new settings.
3.)
Hit yes to confirm and Enter the login and password for the Device to Approve
changes
Default Login:
admin
Password:
<blank>
