Connect the devices
PoE Switch connection diagram
Caution:
▪
Before installing or removing the PoE switch, power must be disconnected. Operating the PoE
switch with its power on is prohibited to prevent injury or damage to the device.
▪
Make sure that the protective ground wire of each device is securely grounded. All power
cables must NOT have any open parts exposed in the air.
Checklist after installation
▪
All mounting parts (hanging ears and screws) are secured.
▪
Polarity of all cable connections is correct.
▪
Wiring between each two devices is correct and secured. Make sure there is no short circuit.
▪
Power on and see if the self-check process is performed normally.
▪
Indicator lights on the PoE device are in the correct working mode.
