background image

 

 

 

Warranty 

Thank you for your interest in the products of AVIPAS Inc.     

This Limited Warranty applies to PoE devices purchased from AVIPAS Inc.   

This Limited Warranty covers any defect in material and workmanship under normal use within the 

Warranty Period. AVIPAS Inc. will repair or replace the qualified products at no charge.     

AVIPAS Inc. provides a two (2)-year warranty (from the date of purchase) for PoE devices.     

This Limited Warranty does not cover problems including but not limited to: improper handling, 

malfunction or damage not resulting from defects in material. 

To receive warranty service, please contact AVIPAS Inc. first. We will decide whether a repair or 

replacement is needed and will advise you of the cost of such repair or replacement.   

 

Copyright Notice 

All contents of this manual, whose copyright belongs to our corporation cannot be cloned, copied or 

translated without the permission of the company. Product specifications and information which were 

referred to in this document are for reference only. We may alter the content at any time and without 

prior notice.  

 

 

 

VER: 2021-9-27 (EN) 

Contact Details: 

 

AViPAS Inc.   

Address: 

1700 Wyatt Drive, Suite #3  

Santa Clara, CA 95054   

Phone:   

1-844-228-4727   

Fax:     

(408) 228-8438   

Email: 

info@avipas.com   

Website:   

http://www.avipas.com 

 

 

Summary of Contents for AV-POE4







Reviews: