2-3
2.3 Installation of the SCSI Card
Hardware Installation
1) Power off your computer.
2) Plug the SCSI card in an available slot of your computer.
Be sure to screw it firmly.
3) Power on your computer.
Software Installation
In Windows 3.1
1) If your SCSI card is bundled with Avision AV360CS,
then installing the scanner driver will at the same time
complete the installation of the SCSI card driver.
2)
If your SCSI card is not bundled with Avision
AV360CS, then please follow the installation sheet
contained in your SCSI card.
In Windows 95
1) Press Start Setting Control Panel. And then double
click "Add New Hardware". Select SCSI Adapter.
2) Choose Have disk and type "d:\DTCSCSI"(d means the letter
indicating your current CD-ROM drive)
3) Choose Finish and restart Windows 95.