7-2
Appendix Detailed Procedure for installing
SCSI Driver
In Windows 95, please:
1) The "New Hardware Found?" dialog box will be displayed.
Choose Driver from hard disk provided by the hardware
manufacturer or choose Do not install a driver.
If you choose Driver from hard disk provided by the
hardware manufacturer, please follow the following
procedure.
2) The "Install from hard disk provided by the hardware
manufacturer" dialog box will be displayed. Press Browse
button to assign your path. Type d:\DTCSCSI (d is the
letter indicating your current CD-ROM drive). Press OK.
3) The unknown device statement will be displayed. Press
OK.
4) The d:\SCSI and filename will be displayed. Press OK.
Your are now completing the installation of SCSI card on
your computer.
If you choose Do not install a driver, please follow the
following procedure.
5) Click Windows Start icon from the bottom. Choose
Setting. Choose Control Panel from Setting.
6) Double click "Add new hardware" icon from the Control
Panel. The "Add new hardware wizard" dialog box will be
displayed. Choose Next.
7) The "Do you want Windows to search for your hardware"
dialog box will be displayed. Press No and then press
Next.
8) Choose hardware type "SCSI Controller", then press Next.