View or download the scanned images (PC)
1.
Connect the scanner to your computer via the supplied USB cable (be sure to turn
on your scanner).
2.
Click the Removable Disk and you will find a folder of
DCIM\200DOC
for your pdf
files and
DCIM\100PHOTO
for your jpeg files.
Note:
While connecting and turning on the scanner, the batteries can not be charged!
View or download the scanned images (iPad)
1.
Plug the iPad Camera Connector
(
not included
)
to iPad dock connector. Plug the USB connector to iPad Camera Connector.
2.
The scanned images in the micro SD card of your scanner will be displayed in iPad in 3 seconds. Choose [
Import All
] to load
the scanned images to the album of your iPad.
View or download the scanned images (Wi-Fi)
1.
Turn Wi-Fi mode to the on
position and then wait for
Wi-Fi ready.
2.
Connect to a Network by
selecting Network ID from
device’s Wi-Fi setup list.
3.
Launch an Internet Browser
to preview your photos.
4.
Select photos and then click
Download
icon to
download to your computer.
Note
:
1.
If you are not directed to Avision PhotoView automatically, you must type in your default home page URL., eg.,
http://www.google.com or type in http://10.10.100.1. This setup will redirect you to “Avision PhotoView” page as above.
2.
For more information on the Wi-Fi connection, please refer to the User Manual in the included memory card.
Start sheet-fed scanning with feeder dock
By attaching the feeder dock into the scanner, the whole unit allows you to start auto scan as soon as your document is inserted
to the feeding slot. When the scan is finished, the image is saved in the memory card. In addition, the whole unit allows you to
connect the power with the supplied power adapter.
*
Only MiWand 2 Wi-Fi PRO comes with a feeder dock!
Installation:
1.
Press and HOLD the latch at the left end.
2.
Plug the right end of the scanner to the right end of the feeder dock with the copper strips
inserting into the hole.
3.
Place the left side of the scanner to the slot.
4.
Release the latch.
Connecting the power (via *power adapter):
Simply plug the small end of the power adapter to the power jack of the ducking unit and the
other end to a power outlet.
*
Power Adapter: Available for MiWand 2 Wi-Fi PRO version only!
*
While connecting the scanner with the power adapter, if you turn off the scanner, the Li-Ion
battery can be charged!
Note:
To scan with the feeder dock, you need to connect the scanner to the supplied
power adapter!
Operation:
1.
Make sure the Wi-Fi switch is turned off and then press to turn on the scanner.
2.
Refer to the preceding page on [
Choose your desired scan settings
] to select your
desired scan settings.
3.
Insert a page
FACE UP
and align it to the left edge of the feeding slot.
4.
The scan is automatically started when your document is fed into the feeding slot. When
the scan is finished, the image is saved in the memory card.
http://www.miwand.com
Refer to the following list for a proper scan speed (based on an A4-size paper):
0.6 second (B&W, 300 dpi)/1.6 seconds (Color, 300 dpi)
;
2.4 seconds (B&W, 600 dpi)/6.5 seconds (Color, 600 dpi)/
9.8 seconds (Color, 1200 dpi) * 1200 dpi: Only available for MiWand 2 Wi-Fi!