Getting Started
1-10
1. *IP Address: An IP (Internet Protocol) address uniquely identifies a
host connection to an IP network. System administrator or
network designer assigns the IP address. The IP address consists of
two parts, one identifying the network and the one identifying your
node.
The IP address is usually written as four numbers separated by
period. Each number can be zero to 255. For example,
10.1.30.186 could be an IP address.
2. *SMTP: Stands for Simple Mail Transfer Protocol. It is the main
communication protocol used to send and receive email on the
Internet.
3. *SMTP Port: This setting defines the TCP/IP port for incoming mail.
By default, this setting uses port 25 that is the Internet standard
for receiving SMTP mail. If your SMTP server listens on a
non-standard port, change this value accordingly.
4. *NTP: Stands for Network Time Protocol. It is the main time
protocol used on Internet.
5. To use @V5000 LAN Fax service, you must first install the FaXess
software on your fax server.
Note:
