@V5000 User’s Manual Setting up Your Machine 2-11
Note:
1.
If you wish to assign a login name, please press the “Menu” button and
select the “Administrator”>”Admin. Login Name”> and then enter your
login name. (Up to 16 characters)
2.
If you wish to assign a password, please press the “Menu” button and select
the “Administrator”>”Admin. Password”> and then enter your password.
(Up to 8 characters)
3.
Please make a note of your new login name and password. The new login
name and password are required each time you select the “Network
Configuration” and “Administrator” item.
4.
To send document via e-mail from the @V5000, you are required to enter
at least the IP address/Subnet Mask/Gateway IP/SMTP server.
5.
*NTP Server: Stands for Network Time Protocol. To set the correct time
on the @V5000, it is recommended to fill in the IP address of your NTP
server. For your information, following IP addresses of the NTP servers
can be accessed. Simply choose one of them and fill the IP address in the
NTP server field on the Network screen.
Country
Host Name
IP Address
Australia
ntp.cs.mu.OZ.AU
128.250.36.2
Canada
clock.uregina.ca
142.3.100.2
Swiss
swisstime.ethz.ch
129.132.2.21
Germany
ntp0.fau.de
131.188.34.75
France
canon.inria.fr
192.93.2.20
Hong Kong
clock.cuhk.edu.hk
137.189.6.18
Japan
clock.nc.fukuoka-u.ac.jp 133.100.9.2
USA
ntp.alaska.edu
199.165.76.11
2. To set the clock for the @V5000, in addition to entering the IP address of the
NTP server, you are requested to choose the appropriate time zone in your
area in the “Date/Time” field. To choose the appropriate time zone, please
press the “Menu” and then “General” buttons on the Control Panel, then
select your time zone in “Time Zone” field. Once you are done, the @V5000
is able to reflect the accurate local date and time each time the machine is
powered on.