15
Connecting the Power and Turning on the Machine
1.
Press the power switch to the “0” position to turn off the product.
2.
Connect one end of the power cable to the Power jack of the product
.
3.
Connect the other end to an appropriate power outlet.
4.
Press the power switch to the “-” position to turn on the product. After
showing the booting up message, the LCD display prompts the preset
ready status.
Note:
You can press the Energy Saver button on the control panel to switch to the
power saving mode. If the product is idle for 15 minutes (default setting), it
automatically shuts off the scanning lamp. Press any key except the Power
Saving button to return to the ready status.
Power Jack