background image

 

 

Introduction 

 

Utilizing infrared technology, this thermometer takes 

temperatures in seconds by measuring heat generated by 

measuring heat generated by the surface skin of the forehead 

or other objects. This product conforms to the provisions of the 

EC directive MDD(93/42/EEC).Its advantages include: 

1. 6 in 1 functions 

Human Body/Object/Night Mode Option/Fever Alarm/ 30 

User Memory/Backlight 

2. Night Mode Option 

Switch to Night mode to reduce the interference of buzzer 

during your baby sleeping. 

3. Red LED Light for Fever Alarm 

This device has the LED light to remind user their readings 

are over 38

°

C and plus the beep sound only in Human 

Body Mode. 

4. 30 User Memory 

5. Illuminated Backlight Display 

6. 

°

C/

°

F Switch-able Function 

7. One-second Reading 

8. Auto power off for power saving 

9. Low-battery Indicator 

Indications for battery condition and measuring range. 

10.Large LCD Display 

11.Economic design and convenience: 

This is a 

Non-contact

 medical thermometer that 

enables temperature readings, designed for sanitary 

conditions, cleanliness, and convenience. Simply move 

the thermometer close to the subject's forehead or object 

at the distance indicated by the device.   

12.Instant Measurement   

By using our unique technology, users can get their precise 

body temperature instantly and accurate.

 

 

 

 
 

 

 

Important Information Before Use 

 
When using this product, please be sure to follow all the notes 
listed below. Any action against these notices may cause 
injury or affect the accuracy. 
1.   Do not disassemble, repair, or remodel the thermometer. 
2.   Be sure to clean the thermometer lens each time after 

usage. 

3.   Avoid direct finger contact with the lens. 
4.   No modification of this equipment is allowed. 
5.   It is recommended that user may take 3 temperatures. If 

they are different, use the highest reading. 

6.   Do not expose the thermometer to extreme temperature, 

very high humidity, or direct sunlight. 

7.   Avoid extreme shock or dropping the device. 
8.   Before the measurement, patients and thermometer should 

stay in steady state room condition for at least 30 minutes.

9.   Avoid measuring temperature in 30 minutes after exercise, 

bathing, or returning from outdoor. 

10. To protect the environment, dispose of empty batteries at 

appropriate collection sites according to national or local 
regulations. 

11. It is ill-advised to disassemble the thermometer. 
12. Please use the thermometer solely for its intended purpose.
13. Carefully hold the device when in use to avoid dropping the 

device. 

14. Allow one minute between successive measurements as 

slight variations may occur if measurements are taken over 
a short period of time. Use average temperatures instead. 

15. There are no absolute body temperature standards. Keep 

reliable records of your personal temperature to serve as a 
reference for judging a fever. 

16. Under any circumstances, the temperature taking result is 

ONLY for reference. Before taking any medical action, 
please consult your physician. 

17. It is recommended calibrate the device every 1 year. 

18. This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: (1) this 
device may not cause harmful interference, and (2) this 
device must accept any interference received, including 
interference that may cause undesired operation

 

 

Summary of Contents for NT16B













Reviews: