12
Memory Function
Memory Recall:
You can recall up to 10 measurements currently stored in memory to
share with your physician or trained healthcare professional.
1. When the device is on, press once briefly on the Memory Button,
then pass it again to show the last measurement accompanied by
“
” symbol.
2. The “
” symbol or “
” symbol will appear with each
measurement stored in memory to indicate whether a person or
object temperature was taken.
3. Each press of the same button recalls a previous measurement.
Memory Deletion:
1. Under power on status, you may hold press the “Memory button”
to delete all the readings. The LCD shows “- -” with one beep
sound to indicate that all memories are cleared.
2. Remove batteries, memory will be cleared.
NOTE:
All the readings will be cleared no matter record in Human Mode or
Object Mode.
