background image

Operating Your AviStart

Remote-Controlled Door Lock/Unlock*

To Lock the Doors:

Press the remote control 

C

 button for 1-2 seconds. The doors will lock, the

parking lights will flash twice and the dash mounted LED will flash slowly. If
the Remote Lock Starter Disable feature was programmed ON, the vehicle
starter motor will be disabled. (See the "Programming Table for System
Features" on page 11.)

* If your sys tem was in stalled with this door lock/un lock fea ture, 

all other door lock/unlock related features will apply.

To Unlock the Doors:

Press the remote control

D

button for 1-2 seconds. The doors will unlock. The 

interior lights will turn on for 30 seconds or until the ignition key is turned on.
The parking lights will flash once and the dash mounted LED will turn off. If
the Remote Lock Starter Disable feature was programmed ON, it will
disengage allowing you to start the vehicle engine.

User-Programmable Ignition-Controlled Door Lock/Unlock 

For the ultimate in security and convenience, the AviStart can be programmed 
to automatically lock your doors when the ignition key is turned on or the
engine is started, and will unlock when the ignition key is turned off. This
feature can be programmed ON or OFF. (See the "Programming Table for
System Features" on page 11.)

Remote Panic with Safety Locks™ (capability)

In a threatening situation, you can activate Remote Panic with Safety Locks

.

When activated, the siren/horn will sound and the parking lights will flash. If
you are inside your vehicle and the ignition key is "ON," the doors will lock. If 
you are outside the vehicle with the ignition key "OFF", the doors will unlock
allowing you to move to safety. (Requires the addition of a siren or interfacing
with your vehicle horn.)

4

AviStart 4001 Owner’s Manual 1099

Summary of Contents for Avistart 4001

















Reviews: