background image

Remote-Controlled Trunk Release Capability

If you have the optional Trunk Release installed, simply press the remote

control TRUNK button for 1-2 seconds to activate your vehicle electronic

trunk release. The trunk will "pop" open (may require an optional relay).

Remote-Controlled Accessory Output

This output allows you to add a remote-controlled optional accessory such as

a window roll-up or fuel door release. To activate your optional accessory, see 

the "Programming Table for Remote Controls" on page 12.

Remote Engine Start - Safety and Counter-Theft

I

CAUTION

: Be sure to read the "WARNING" bulletin on the inside

cover of this manual 

before

 attempting to operate remote start.

Automatic Safety and Counter-Theft Features

Before

 remote starting your  engine, the AviStart system will automatically

perform a safety check to ensure the following conditions have been met:

Brake pedal is not depressed.

Engine and ignition are turned off.

Hood is closed.

After

 remote starting your engine, the AviStart system will shut off the engine

immediately if the ignition is OFF and any of the following occurs:

The hood is opened.

The engine RPM rises above preset level.

The brake pedal is pressed.

The remote control START button is pressed.

The 20 or 30 minute programmable run time expired.

Visual Fault Indication

The AviStart has a built-in fault detection system that automatically scans all of 

the safety zones, prevents the system from remote starting and provides a

visual indication if a fault is detected. The parking lights will flash 1 time if the 

hood is opened or 3 times if the brake pedal is depressed and will not allow

the engine to start. If this occurs, bring your vehicle to your authorized Avital

dealer for service.

6

AviStart 4500 Owner’s Manual - 0898 Rev. A

Summary of Contents for AviStart 4500

















Reviews: