Avital AviStart 6000, Owner'S Manual

AviStart 6000 Owner's Manual

Protected Valet Mode
You should place your system in Protected Valet Mode whenever your vehicle 
is being serviced by mechanics, car wash personnel or driven by valet parking 
attendants. While in the Protected Valet Mode, all remote starter and alarm
functions are bypassed to prevent unauthorized or accidental operation. If a
remote start is attempted, the parking lights will flash 4 times and the vehicle
will not start. Remote-controlled door lock/unlock , trunk release and all
optional accessories will still operate.

To Turn on Protected Valet Mode
1. Turn the ignition key to the "ON" position or start the engine.

2. Flick the valet switch to the "ON" position.
3. The LED will turn on solid red to indicate the system is in the Protected

Valet Mode.

4. Turn the ignition key to the "OFF" position.

To Turn off Protected Valet Mode
1. Turn the ignition key to the "ON" position or start the engine.

2. Flick the valet switch to the "OFF" position.
3.  The LED will turn off to indicate the system is no longer in the Protected

Valet Mode.

4. Turn the ignition key to the "OFF" position.

LED System Status Indicator 
The LED on your vehicles dashboard or center console will inform you of the
system status.

LED

Status

Off

System is disarmed

On solid

In Protected Valet Mode

Slow flash

System is armed

Flashing in cycles

See "Specific Intrusion Identification" on page 7.

Rapid flash

Passive arming

6