11
MAINTENANCE
WARNING!
ENSURE THE BLOWER VAC IS
DISCONNECTED FROM THE POWER
SUPPLY BEFORE PERFORMING ANY OF
THE FOLLOWING OPERATIONS.
Clearing Debris
To access the impeller, remove the vacuum
tube and collection bag.
1. Un-fasten hooks from the bag holding points
2. Remove the collection bag from the blower
vacuum outlet.
3. Unscrew the locking knob from the body of
the blower, then rotate vacuum tube
anti-clockwise 90 degrees.
4. Pull away the vacuum tube assembly from
the body of the blower vac.
5. Remove any debris from the impeller and
within the blower vacuum outlet.
• There are no user serviceable parts in the
blower vacuum; if a fault is suspected or the
supply cord requires replacement, return the
blower vacuum to a power tool repairer.
• Keep air intake clean and air vents free from
debris to avoid overheating the motor.
• Do not use cleaning agents to clean the
plastic parts of the blower vac. A mild
detergent on a damp cloth is recommended.
Water must never come into contact with the
blower vacuum.
• If the blower vacuum vibrates abnormally,
