AVL DiTEST OBD 1000
General
User Manual
1
1
General
1.1
General Description
With the
AVL DiTEST OBD 1000
plus a suitable diagnostic program all data relevant for an OBD-
test (OBD:
O
n
B
oard
D
iagnosis) may be read out from the error memory of the engine control unit.
The communication with the PC is wireless via Bluetooth. As an alternative a USB-cable may be
used.
Always follow the safety instructions enclosed with the AVL DiTEST OBD 1000!
Fig. 1-1
1.2
Display Elements and Signaling Devices
No.
LED
Status
Meaning
(3)
blue
off
Device not supplied with power (from the OBD-socket of
the car)
(3)
blue
on
Device supplied with power (OBD-socket of the car)
(1)
green/red/
yellow
flashes yellow once
indicator peeps once
Device ready for operation
(1)
green/red/
yellow
lights up green
Connection to PC (Bluetooth or USB) is established
(1)
green/red/
yellow
flickers green
Connection to PC (Bluetooth or USB) is established data is
being transferred
(1)
green/red/
yellow
flashes red 3x
indicator peeps 3x
Device supplied with power but for more than 20 seconds
without connection to PC ('loss protection')
(1)
green/red/
yellow
flickers orange
Firmware update in progress:
please wait
(1)
green/red/
yellow
flashes green once
and red twice
Error during firmware update or no firmware loaded:
repeat update
(4) OBD-plug
(2) USB Mini
B-socket
5-pin
(3) LED blau
OBD-Stecker
WARNING
(1) LED
green/red/yellow
Eng
li
sh