K-Series Loom User Manual
Additional Loom Information
Reference Guide
Page | 133
R
EFERENCE
G
UIDE
1)
Connect your computer, phone, or tablet to your loom. Open a
browser and go to http://[loom name].local.
2)
Power the loom on in the software.
3)
Click the warp tension button to set the tension for winding on. You
will not need to remove the brake cable on the warp beam.
4)
Warp the beam.
5)
Thread the heddles. To get as close as possible to the heddles,
remove the cloth beam cover, the cloth beam, the cloth guide
rollers, the beater, and the cloth storage beam.
6)
Replace the cloth storage beam and the beater.
7)
Sley the reed.
8)
Replace the cloth guide rollers, cloth beam, and cover.
9)
Attach the warp to cloth storage apron.
10)
Set the desired warp tension in the loom software. The default is
55.
11)
Advance the warp for weaving. If you set the PPI in the software to
1, you will be able to advance rapidly.
12)
Set the PPI to the setting you want to weave with.
13)
Open the WIF you want to weave in the loom software.
14)
Weave your project.
15)
When you are done with a weaving session on the project, you can
power off the loom in the loom software.
16)
When you are ready to start again, power the loom on in the loom
software, open the WIF you are using and double-check the
settings before beginning to weave again.
17)
When your project is complete, remove the cloth from the loom.
