Rug Loom User’s Manual
Appendix – Optional Features
Air Beater
Page | 65
A
IR
B
EATER
There is an air cylinder for each side of the beater which are attached to the
top of the loom frame.
1)
Select the screws from the hardware pack and use them to mount
the Beater Air Cylinder in the holes at the front of the frame.
Figure 46 – Air Cylinder
2)
Bolt the other end of the cylinder to the end of the bracket
attached to the beater.
3)
Attach the air tubing which has been routed from the manifold to
the proper locations.
A
UTOMATIC
A
DVANCE
The Automatic advance consists of several components which work together
to move the warp and the finished cloth smoothly through the loom. The air
brake on the warp beam is replaced with tension arms with weights that
allow the warp to advance automatically. The cloth beam and the cloth
storage beam are connected to gears run by the air system. A pressure
roller is added to the loom to keep the tension correct.
The automatic advance is customized to your loom, so there may be
differences from the instructions here. Depending on your loom, there may
be mechanisms and tension arms on both sides of the loom.
Summary of Contents for Rug Loom
