Appendix – Optional Features
Rug Loom User’s Manual
Page | 72
Automatic Advance
Figure 53 - Cloth Storage Auto Advance
8)
Position the beam so that the ratchet and auto advance gear
mesh together.
9)
Rotate the beam by hand a time or two to settle the remaining
block. Tighten.
10)
Rotate the beam again. If it rubs at the ends, loosen one side and
make whatever adjustment is needed.
11)
Tighten the bolts on the pillow block so that the beam is held in
position.
12)
Bolt the air cylinder into place on the outside of the loom and
connect it to the auto advance mechanism.
13)
Route the tubing through the loom and connect it to the air
cylinder.
Pressure Rollers
The Pressure Rollers have been clearly labeled Back and Front (referring to
the front of the loom). They have been placed in the crate in the proper
Summary of Contents for Rug Loom
