Appendix – Optional Features
Rug Loom User’s Manual
Page | 78
Automatic Advance
4)
Wrap the cable around the sectional beam drum three times (as
shown) with the first wrap toward the outside of the loom.
Tension Cord Adjustment
1)
At the end of the cable or cord assembly is an eyebolt.
2)
Remove one hex nut and washer from the eyebolt and insert it (from
the inside of the loom) through the hole at the very back of the upper
left horizontal frame piece.
Figure 59 - Upper Tension Tie-up
3)
Replace and tighten the hex nut and washer on the eyebolt.
Tension Arm Weight Instructions
The tension arm weight provides the weight for the tension arm assembly,
allowing you to easily adjust the tension on the warp beams. Once the arm
is installed on either position, adding the weight is the same.
Summary of Contents for Rug Loom
