iDirect Modem
AvL Technologies
| Proprietary – Content is Subject to Change without Notice
5
When setting the system to communicate by Ethernet, it is important to make sure the controller has a network path
to the iDirect modem so the controller can query the modem over the network. The example shown below
represents a typical installation.
Path
Main Window
File
Settings
AAQ Network Interface Options
Level 1
Figure 4 - AAQ Network Interface Option Window
Configuration
3.
3.1.
Core Configuration Items
Modify the following configuration items to enable interaction of the controller with the modem. These configuration
items can be accessed using the AAQRemote GUI. The configuration varies depending upon the physical connection
method (Ethernet or serial).
Path
Main Window
View
Configuration
Core
Level 4