SkyEdgeII Modem
9
4.3.
Module Window
Device Window
4.3.1.
The Device Window can be accessed through the AAQRemote GUI through View -> Device Window. This window
presents all necessary information from the modem with respect to the Transmit/Receive streams.
Path
Main Window → View→ Device Window
Level 1
Figure 8 – Device Window
Item
Description
Modem Locked
Flag indicating that the modem has locked on the carrier
Downlink SNR
This displays the Signal To Noise ratio (signal strength) of the locked carrier
Downlink Center
Frequency
This displays the center frequency of the locked carrier
Tx Enabled
Flag indicating whether the transmit chain has been enabled by the
modem.
Lat/Long Sent
Local indication of the position of the terminal, to be sent to the hub
equipment.
Logic Table
Troubleshooting codes for debugging *For future use
Error Message
Listing of any error messages specific to the modem
Message Out
Troubleshooting codes for debugging
