Workshop Dobby Loom User’s Manual
Using the WDL
Warping Section
Page | 49
Figure 52 - Single Beam Warp Path
Two-Beam
For those who ordered the Two-Beam, it is wound on in exactly the same
manner as the first warp beam except when winding on the warp to the
upper beam, the warp goes under Separation Beam and up to the top warp
beam. To route the thread for the upper beam, he warp goes over the top of
the warp beam, then down under the upper Separation Beam toward the
heddles.
Figure 53 - 2-Beam Warp Path