128.828UK User Manual
Connection Instructions
•
Connect the output of the source device to the input of the splitter. Use an HDMI cable of up to 10m for
HD signal or 8m for 4K signal. (NB: to maintain 4K resolution, always use 4K certified cables)
•
Connect the outputs of the splitter to the inputs of the display devices. Use HDMI cables of up to 15m per
output for HD signal or 8m per output for 4K signal. (NB: to maintain 4K resolution, always use 4K
certified cables)
•
Connect the 5V power adaptor (supplied) to the splitter; plug into a mains outlet and switch on.
•
Green LEDs on front of the splitter will illuminate when the source and display devices are connected and
switched on.
In The Box
1.
HDMI Splitter 1x8
2.
5V DC Power Adaptor
3.
User Manual
Warning
•
For reasons of electrical safety, this device must never be immersed in water, exposed to damp conditions
or excessive force.
•
Do not use this device if you find that it is damaged in any way.
•
Only use the power supply provided by the manufacturer.
•
When not in use for long periods, disconnect the power supply from the mains.
•
Do not attempt to repair this device or take apart under any circumstances, as this will invalidate your
warranty.
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at
the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2017. AVSL Group Ltd.
