Latest products and information available at www.avlite.com
15
AV-C310-ILA& AV-C410
Solar Powered ICAO Low Intensity Obstruction Light Type A
Error/Acknowledge Indication
If the key sequence is invalid, or an out of bounds value is attempted to be set, the light flashes 5 times
for 1 second. (The command then needs to be sent from the start.)
Example key sequence:
(Set the intensity level to 5 – undefined.)
The light flashes 5 times for 1 second.
When a key sequence has been entered successfully the light will respond acknowledgement with a
long 1 second flash.
Hibernation Mode - only available with GPS option fitted (Advanced users)
For situations where the lantern is put into storage for a known period, the IR Remote control can be
used to configure the lantern into Hibernation Mode for a user programmable date range.
Hibernation Mode maximises conservation of the battery power by disabling the light (will not activate
at night) and shutting off the GPS receiver to rely on the internal clock for date checking. The IR
sensor is still monitored in hibernation mode. Power consumption is only bettered by physically
disconnecting the battery supply.
Hibernation Mode is defined by a start date and end date that are programmed into the lantern via the
IR Remote Control.
Using the IR Remote Control
The lantern must be in Test Mode prior to pressing any of the following key sequences. However, the
lantern will return to Normal Operation if it has not detected a valid key press for a period of 15
seconds. When the lantern exits from Test Mode it will either enter Dusk to Dawn mode, Hibernation
mode, or Storage Mode, if enabled.
