Call Holding
54
BlueFRITZ! AP-X – 6 Operating BlueFRITZ! AP-X
6.6 Call Holding
Whenever you have one active connection and one caller on
hold, you can switch from one call to the other as often as
you want using the Hold button.
To alternate between two connections, proceed as follows:
The alternating connections can be ended in a number of
ways:
Call No. 1
P
You are talking to Caller No. 1.
R
Press the Hold button. Call No. 1 is now on hold.
M
To dial a second call, simply dial either the desired
extension number or the outside line access “0”
followed by the desired external number.
Call No. 2
P
If the call is answered, you can consult on this line.
The original caller is still on hold.
R2
To switch from Call No. 2 to Call No. 1, dial the
sequence shown at left.
Call No. 1
P
Call No. 1 is now active again and Call No. 2 is on
hold.
R2
To switch back from Call No. 2 to Call No. 1, dial the
same sequence again. In this way you can alternate
between the Calls 1 and 2.
The caller on hold hangs up. You can continue talking
on the active connection.
R1
You end the active connection by dialing the sequence
shown at left. The call that was on hold is now active
again, and there is no call left on hold.
O
K
Call
P
You can also return to the call on hold by hanging up
the handset: this ends the currently active connection.
In this case the phone rings as soon as you hang up.
Pick up the handset again to return to the last call that
was on hold.
Summary of Contents for Bluefritz! AP-X
Page 1: ......
