10
Pressing
ADD
(7) adds the selected title to the playlist. The display shows on the right side the number
of programmed titles (PGM-QT"), below the playing time of the programmed list (P-TIME).
NOTE
: The program function is only available while the player is stopped. The maximum number of
programmed tracks is 99, the maximum program duration is 99 minutes. In case the level setting is
active, you must exit first.
Example
The CD inside the player contains 15 titles. You want to play only titles 7, 3 and 8.
Press MENU (7) for more than 2 seconds.
•
Select title 7 using the SELECT buttons 5 and 6. Display shows “TRCK 7/15”.
•
Now add this track (pressing
ADD
(7)) to the playlist.
•
Select title 3 using the SELECT buttons 5 and 6. Display shows “TRCK 3/15”.
•
Now add this track (pressing
ADD
(7)) to the playlist.
•
Select title 8 using the SELECT buttons 5 and 6. Display shows “TRCK 8/15”.
•
Now add this track (pressing
ADD
(7)) to the playlist.
•
Now press
STORE
(8) to finish the programming and store the playlist
Deleting an existing playlist
Press
MENU
(7) for more than 2 seconds. Then press
DEL PGM
(9) and the playlist is deleted. The
playlist will also be deleted automatically as soon as a CD is ejected or the unit is switched off (stand-
by).
3
Advanced Settings
The C 5.2 offers a lot of custom specific settings in its menu system. To enter the menu just tap on the
button MENU (7). The button now changes to EXIT. A second tip on this button leads you to the normal
operating mode. When the menu system is active you can select the desired function using the
buttons
< ITEM >
(5, 6). The setting is done using the buttons
< VALUE >
(8, 9).
Depending on the actual source the menu system offers a range of settings described in the following.
3.1
Global settings
3.1.1
Tone control
Set tone control to "bypass" (= linear) or "active". In case the tone control is activated "TONE ON" is
shown in the display (10), otherwise "LINEAR".
You can choose if you want to change bass and treble settings simultaneously for all inputs ("global")
or especially for the actual input ("individual").
The loudness function depends on speakers and properties of the listening room and is therefore
always "global".
NOTE
: In case tone control is set to "bypass" the menu will skip the bass, treble, and loudness
settings.
3.1.2
Bass
Set a global or individual bass level between – 5 dB and + 9 dB.
