FRITZ!Box 3390
104
Obtaining an IP Address Automatically
Setting Up Guest Access via LAN 4
The network port “LAN 4” can be configured as a guest ac-
cess. Guests can then connect their laptops to the guest ac-
cess with a network cable to access the Internet. The guest
device does not have access to the home network.
Set up the guest access as follows:
1.
Open the FRITZ!Box user interface.
2.
In the “Home Network > Network” menu, select the “Net-
work Settings” page.
3.
Enable the guest access.
14.2
Obtaining an IP Address Automatically
The FRITZ!Box has its own DHCP server, which assigns IP ad-
dresses to the connected computers. The connected comput-
ers must be configured such that they can receive their IP ad-
dresses automatically. The steps for checking and adjusting
this option differ among the operating systems. See the rele-
vant section for your operating system.
Obtaining an IP Address Automatically in Windows
Open the network connections:
•
Windows 8
Press the Windows key and the Q key at the same time.
The search menu for apps is opened. Enter “ncpa.cpl” in
the search field and click enter.
Entering “ncpa.cpl” in Windows 8
If FRITZ!Box is operated in a network, no other DHCP server
may be activated in this network.
Summary of Contents for Fritz!Box 3390
Page 142: ......
Page 147: ...FRITZ Box 3390 147 ...
Page 148: ...FRITZ Box 3390 148 ...
Page 149: ...FRITZ Box 3390 149 ...
