FRITZ!Box 3390
36
Configuring an Internet Connection in the FRITZ!Box
7
Configuring an Internet Connection in the FRITZ!Box
Once you have connected the FRITZ!Box to your Internet connection,
you must configure the Internet connection in the FRITZ!Box user in-
terface so that the FRITZ!Box can establish the connection to your In-
ternet service provider and connect to the Internet.
The sequence and number of steps required to configure your Internet
connection depend on the kind of connection, the desired operating
mode, and the Internet service provider.
7.1
Internet Connection for DSL
Enter the Internet account information you received from your
DSL/Internet provider. If you have a DSL line, you received
Internet account information from your DSL or Internet service
provider. These data are required to configure the Internet
connection.
Configuring an Internet Connection Automatically
If your Internet service provider arranges for the service of au-
tomatically configuring your Internet connection, the auto-
matic configuration will be performed right after the
FRITZ!Box is connected. No additional settings for the Inter-
net connection have to be configured in the FRITZ!Box. To
start automatic configuration, some providers require that
you enter a start code.
Configuring the Internet Connection Using the Wizard
1.
Open the FRITZ!Box user interface (see
2.
Select the “Wizards” entry in the menu.
3.
Click the “Set Up Internet Connection” Wizard and follow
the instructions.
When the Wizard is finished, your Internet connection has
been configured.
Your Internet service provider also supplied information
about the configuration of your Internet connection. Always
perform the Internet connection setup as described by your
provider.
Summary of Contents for Fritz!Box 3390
Page 142: ......
Page 147: ...FRITZ Box 3390 147 ...
Page 148: ...FRITZ Box 3390 148 ...
Page 149: ...FRITZ Box 3390 149 ...
