Installing the Driver Software in Windows 2000
16
FRITZ!Card DSL – 2 Installing FRITZ!Card DSL
3.
If messages now appear for the Windows Logo Test, it is
safe to ignore them and to select the button “Continue
Anyway”.
4.
When the message “The wizard has finished installing
the software for: AVM FRITZ!Card DSL” appears, click
“Finish”.
5.
The DSL Assistant starts automatically.
When you confirm the welcome window and informa-
tion dialog with “OK”, the DSL Assistant will check that
the ADSL line is functioning properly and configure the
basic settings for ADSL connections.
Then the message that the AVM ADSL software can be in-
stalled appears. See the section “Installing the ADSL Soft-
ware FRITZ!DSL” on page 17 for more information.
2.7 Installing the Driver Software in
Windows 2000
Administrator rights are required to install the driver soft-
ware in Windows 2000.
In addition, the current Service Pack for Windows 2000 must
already be installed on your PC.
Once you have connected the FRITZ!Card DSL to the comput-
er, the Plug and Play mechanism of Windows 2000 recogniz-
es the FRITZ!Card DSL as a “Multimedia Controller” automati-
cally. The “Found New Hardware Wizard” starts automatical-
ly.
Follow the instructions on the screen and observe the follow-
ing:
1.
When asked: “What do you want the wizard to do?”, se-
lect the option “Search for a suitable driver for my de-
vice (recommended)” and confirm with “Next”.
2.
Insert the FRITZ!Card DSL CD, select the option “CD-
ROM drives” and confirm your entries with “Next”.
3.
Then you are informed that a driver for a Multimedia De-
vice has been found.
FCdsl-e.book Seite 16 Freitag, 17. Mai 2002 11:55 11