What Is Installed?
12
FRITZ!Card DSL – 2 Installing FRITZ!Card DSL
4.
Remove the enclosed ISDN cable from the package.
The ISDN cable has identical plugs fitted to both ends.
5.
Plug one of these into the FRITZ!Card DSL socket la-
beled “ISDN“.
6.
Insert the other end into the ISDN socket of your ISDN
access (ISDN network terminator ‘NT’).
Start your computer. As soon as the operating system is
ready, you will be prompted to install the software com-
ponents of FRITZ!Card DSL. Read the following sections.
For more information, see the sections “The ADSL Line” on
page 36 and “FRITZ!Card DSL at the ADSL/ISDN Connection”
on page 37.
2.3 What Is Installed?
The installation program sets up the following software com-
ponents in the initial installation:
l
driver software for FRITZ!Card DSL
l
FRITZ!DSL ADSL software
l
FRITZ!, the ISDN communications software
l
AVM system drivers for ADSL and ISDN operation
If you already have individual software components such as
FRITZ! installed, read the instructions in section “Installing
Individual Software Components” on page 20.
The section “Where to Find What After Installation” on
page 19 explains where to find the individual software com-
ponents on your computer after installation.
FCdsl-e.book Seite 12 Freitag, 17. Mai 2002 11:55 11