Installing the Driver Software in Windows XP
FRITZ!Card DSL – 2 Installing FRITZ!Card DSL
15
When you confirm the welcome window and
information dialog with “OK”, the DSL Assistant will
check that the ADSL line is functioning properly and
configure the basic settings for ADSL connections.
Then the message that the AVM ADSL software can be
installed appears. See the section “Installing the ADSL
Software FRITZ!DSL” on page 17 for more information.
2.6 Installing the Driver Software in
Windows XP
Administrator rights are required to install the driver soft-
ware in Windows XP Professional.
Once the FRITZ!Card DSL has been inserted in your computer,
the Plug and Play mechanism of Windows XP recognizes the
FRITZ!Card DSL as a “Multimedia Controller” automatically.
The “Found New Hardware Wizard” is started.
Insert the FRITZ!Card DSL CD and follow the instructions on
the screen. Please note the following:
1.
When asked: “What do you want the wizard to do?”, se-
lect the option “Install the software automatically (Rec-
ommended)” and confirm with “Next”.
2.
Select the entry <CD-ROM DRIVE>:\WINDOWS.XP\FDSL.INF
in the list of entries found and confirm with “OK”.
Drivers found
FCdsl-e.book Seite 15 Freitag, 17. Mai 2002 11:55 11