17
1.10.2.4
Setup via optional RC 9 remote control
Before you can set up a wireless WLAN connection via the
RC 9
, both components must first
be connected to each other. This one-time procedure is called
Pairing
and is described in
section 1.8.1. A detailed description of the entire functionality of the
RC 9
remote control can
be found in a separate operating manual at
www.avm.audio
.
ü
First, perform the
Pairing
procedure as described in section 1.8.1 and select the newly set
up AVM device on the
RC 9
using the
Device Selection
menu item. You can reach this
menu item via the
System Settings
menu that you call up by pressing the
Settings
button
(tool symbol) of the
RC 9
.
ü
On the
RC 9
, select the menu item
Settings
(Einstellungen) in the main menu by pressing
the upper or lower navigation button several times.
ü
By pressing the
Enter
button, select the menu item
Network assistant
and
WLAN
connection.
ü
By selecting the
Scan
menu item afterwards, your AVM device searches for available WLAN
networks and lists them in an overview.
ü
Select the desired WLAN network and enter the network key (WLAN password) via the input
keys of the
RC 9
after pressing
Key
.
ü
Confirm the entered network key (WLAN password) by pressing the
Enter
button and select
Connect
.
ü
In the following overview
Network Info
, the
Wireless
section displays details of the WLAN
configuration.
Summary of Contents for OVATION CS 6.3
Page 1: ...Operating instructions OVATION SD 6 3 OVATION SD 8 3 ...
Page 2: ......