26
application, your device offers the
gain fix
function by both passing through the signal with a
fixed gain setting and bypassing all sound control settings (see 3.1). In addition, all tone control
settings (e.g.
BASS
,
TREBLE
, see 3.1) are disabled - regardless of whether you change the
volume of the other inputs or their sound setting or balance setting.
The gain fix function is also available for the digital inputs
COAX
,
OPTO1
and
OPTO2
. In
contrast to the analog inputs, however, the sound settings (e.g.
BASS
,
TREBLE
) and the
balance setting are active here. This function is useful, if a sound source with its own volume
control is connected to a corresponding digital input (e.g. Sonos).
3.4.7
Set IR control
In addition to control the device via the optionally available
RC 9
remote control or the free
RC
X App for iOS and Android
, a range of essential functions can also be controlled via the classic
RC 3 or RC 8 infrared remote controls. In order to receive a respective infrared signal of the RC
3 or RC 8, please make sure to activate the
set ir control
function (
ON
).
3.4.8
Set auto standby
To save energy, the unit is equipped with a circuit that automatically puts the unit into standby
mode if there is no music signal on the currently active input for more than 20 minutes. This
function is activated (
ACTIVE
) by default and can be deactivated permanently with this menu
item (
NOT
ACTIVE
).
The selected setting is permanently stored when leaving the
Personal Setup
, but can be
changed at any time by calling up the
Personal Setup
again.
3.4.9
Set standby mode
To ensure your AVM device can be switched on at any time via the
RC X App for iOS and
Android
, the integrated AVM X-STREAM Engine® remains in constant operational readiness
when the
net Standby
mode (network standby) is selected. Please note that this increases the
power consumption of your device. If you want to save this power, select the
Standby
mode
in this menu. To switch on the unit again when in Standby mode, press the power button (1),
because the
RC X App for iOS and Android
cannot detect the unit in the selected mode.
3.4.10
Set WLAN via WPS
Set WLAN via WPS
allows you to easily set up a wireless network connection (WLAN / WiFi).
For step-by-step instructions, see section 1.10.2.1.
Summary of Contents for OVATION CS 6.3
Page 1: ...Operating instructions OVATION SD 6 3 OVATION SD 8 3 ...
Page 2: ......