20
Cyclades PM IPDU Installer/Administrator/User Guide
NOTE:
The decimal point will be at the top of the display when the display command is issued with 180-degree
rotation on PM IPDUs with seven-segment displays. The PM42 IPDU has dot matrix display which will display
values with the decimal point correctly positioned in inverted mode.
Syntax
For PM42 IPDUs:
display [<ipdu number or ID> [<0|180> <I|V>[ <cycle time>]]]
For 30A IPDUs:
display [<ipdu number or ID> [<0|180>[ <cycle time>]]]
For other IPDU models:
display [<ipdu number or ID> [<0|180>]]
Arguments
Examples
To set the display of IPDU #2 to inverted mode, enter:
To set the display of IPDU #1 to normal mode, enter:
To set the display of IPDU #3 (PM42) to automatically show the current of each phase every two
seconds, enter:
To view the display status, enter:
no argument
Show display status of all IPDUs in the daisy chain
<IPDU# or ID>
IPDU number or ID in the daisy chain or identification string previously
set by the id command
<IPDU_ID>
Identification string previously set by the id command
0
Normal mode (default)
0|180
Set the orientation of the display: 0 (zero) is the default normal mode, 180
degrees is the inverted mode
pm>
display 2 180
pm>
display 1 0
pm>
display 3 Iauto 2
pm>
display
pm_install_admin_user.book Page 20 Tuesday, March 24, 2009 3:02 PM
