Chapter 3: Accessing the PM IPDU via the Command Line Interface
25
Examples
To display the interval of outlet 1, enter:
To set the interval of outlets 2, 4, 5, and 6 to a value of 2.4, enter:
NOTE:
The PM42 IPDU will not accept entries with decimal places.
list
For the admin user, the list command lists all users that have been created and the outlets assigned
to each of those users. For regular users, the list command lists only the outlets assigned to the user
currently logged in.
Syntax
list
Arguments
none
Examples
As admin, to list usernames and associated outlets in the internal database, enter:
lock
The lock command locks an outlet or group of outlets in their current state. The response to this
command is a list of status lines, one per power port. This command works on all PM IPDUs in a
daisy chain.
Syntax
lock all|<outlet_string>
Arguments
<outlet_string>
Outlet number, such as “5”, outlet name such as “sunfire”, or group of
outlets such as “1, 3-5”
pm>
interval 1
pm>
interval 2,4-6 2.4
pm>
list
pm_install_admin_user.book Page 25 Tuesday, March 24, 2009 3:02 PM
