Avocent DSView Installer/User Manual Download

Page: 163 / 358

Chapter 5: Managing User Accounts

145

Type the path and name of the certificate.

-or-

Use the

Browse

button and select a certificate using the Choose File dialog box.

Click

Save

to save your changes.

Click

Close

. The User Accounts window will open including any modifications.

Changing user passwords

NOTE:

This property may only be modified for users using internal authentication. See

Managing Authentication

Services

on page 53 for more information.

The password of a user may be changed or you may specify that the users enter a new password
when they log in to their next session.

To change the password of a user:

From the side navigation bar, click

Password

. The User Password window will open.

Type the new password you wish to assign to the user and verify the password.

Click

User must change password at next login

to enable a user to define a new password

when they log in to their next session.

Click

Save

to save your changes.

Click

Close

. The User Accounts window will open, including any modifications.

Specifying user account restrictions

NOTE:

This property may only be modified for users using internal authentication. See

Managing Authentication

Services

on page 53 for more information.

To specify account restrictions for users:

From the side navigation bar, click

Restrictions

. The User Account Restrictions window

will appear.

Click

Disable user account

to prevent the user from logging in to the DSView management

software. The user’s account may be re-enabled by unchecking

Disable user account

NOTE:

The users will remain logged in if they have an open session.

Click

User must change password at next login

to enable a user to define a new password

when logging in to the session.

Click

User cannot change password

to prevent the user from changing a password.

Click

Password never expires

to prevent a user’s password from expiring.

Click

Save

to save your changes.

Click

Close

. The User Accounts window will open including any modifications.

Summary of Contents for DSView







































































































































































































































































































































































Search results

Summary of Contents for DSView

Reviews:

Related manuals for DSView

Brands by name

Popular brands

Avocent DSView, Installer/User Manual

Search results

Summary of Contents for DSView

Reviews:

Related manuals for DSView

Brands by name

Popular brands